diff mbox series

[2/2] examples/flow_filtering: fix remove vlan item

Message ID 1541410503-29360-2-git-send-email-orika@mellanox.com (mailing list archive)
State Accepted, archived
Delegated to: Thomas Monjalon
Headers
Series [1/2] examples/flow_filtering: fix set offloads based on cap |

Checks

Context Check Description
ci/Intel-compilation success Compilation OK

Commit Message

Ori Kam Nov. 5, 2018, 9:35 a.m. UTC 
  Since the vlan is not in use and some PMD can't support vlan = 0
this item was removed.

Fixes: 4a3ef59a10c8 ("examples/flow_filtering: add simple demo of flow API")
Cc: orika@mellanox.com

Signed-off-by: Ori Kam <orika@mellanox.com>
---
 examples/flow_filtering/flow_blocks.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/examples/flow_filtering/flow_blocks.c b/examples/flow_filtering/flow_blocks.c
index 4da4592..bae7116 100644
--- a/examples/flow_filtering/flow_blocks.c
+++ b/examples/flow_filtering/flow_blocks.c
@@ -46,8 +46,6 @@  struct rte_flow *
 	struct rte_flow_action_queue queue = { .index = rx_q };
 	struct rte_flow_item_eth eth_spec;
 	struct rte_flow_item_eth eth_mask;
-	struct rte_flow_item_vlan vlan_spec;
-	struct rte_flow_item_vlan vlan_mask;
 	struct rte_flow_item_ipv4 ip_spec;
 	struct rte_flow_item_ipv4 ip_mask;
 	int res;
@@ -85,17 +83,6 @@  struct rte_flow *
 	pattern[0].mask = &eth_mask;
 
 	/*
-	 * setting the second level of the pattern (vlan).
-	 * since in this example we just want to get the
-	 * ipv4 we also set this level to allow all.
-	 */
-	memset(&vlan_spec, 0, sizeof(struct rte_flow_item_vlan));
-	memset(&vlan_mask, 0, sizeof(struct rte_flow_item_vlan));
-	pattern[1].type = RTE_FLOW_ITEM_TYPE_VLAN;
-	pattern[1].spec = &vlan_spec;
-	pattern[1].mask = &vlan_mask;
-
-	/*
 	 * setting the third level of the pattern (ip).
 	 * in this example this is the level we care about
 	 * so we set it according to the parameters.
@@ -106,12 +93,12 @@  struct rte_flow *
 	ip_mask.hdr.dst_addr = dest_mask;
 	ip_spec.hdr.src_addr = htonl(src_ip);
 	ip_mask.hdr.src_addr = src_mask;
-	pattern[2].type = RTE_FLOW_ITEM_TYPE_IPV4;
-	pattern[2].spec = &ip_spec;
-	pattern[2].mask = &ip_mask;
+	pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV4;
+	pattern[1].spec = &ip_spec;
+	pattern[1].mask = &ip_mask;
 
 	/* the final level must be always type end */
-	pattern[3].type = RTE_FLOW_ITEM_TYPE_END;
+	pattern[2].type = RTE_FLOW_ITEM_TYPE_END;
 
 	res = rte_flow_validate(port_id, &attr, pattern, action, error);
 	if (!res)