diff mbox

[U-Boot] arm64: ls2088ardb: Add distro boot support

Message ID 1496632038-34492-1-git-send-email-ying.zhang22455@nxp.com
State Accepted
Commit 0a09d20b2986abef552a6d7e7a904a0c6bdd6b14
Delegated to: York Sun
Headers show

Commit Message

Zhang Ying-22455 June 5, 2017, 3:07 a.m. UTC 
From: Zhang Ying-22455 <ying.zhang22455@nxp.com>

Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD/USB/SATA/SCSI disk)
and execute autoboot script. Tested on ls2088ardb with automatically
boot Ubuntu from SD card or USB disk, if it fails to detect external
storage disk, fall back to nor/qspi boot.

Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
---
 configs/ls2080ardb_defconfig      |  1 +
 configs/ls2088ardb_qspi_defconfig |  1 +
 include/configs/ls2080ardb.h      | 93 +++++++++++++++++++--------------------
 3 files changed, 47 insertions(+), 48 deletions(-)

Comments

York Sun Aug. 7, 2017, 8:02 p.m. UTC | #1 
On 06/04/2017 08:07 PM, ying.zhang22455@nxp.com wrote:
> From: Zhang Ying-22455 <ying.zhang22455@nxp.com>
> 
> Include common config_distro_defaults.h and config_distro_bootcmd.h
> for u-boot enviroments to support automatical distro boot which
> scan boot.scr from external storage devices(e.g. SD/USB/SATA/SCSI disk)
> and execute autoboot script. Tested on ls2088ardb with automatically
> boot Ubuntu from SD card or USB disk, if it fails to detect external
> storage disk, fall back to nor/qspi boot.
> 
> Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
> ---

Applied to fsl-qoriq master. Thanks.

York
diff mbox

Patch

diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig
index ed79c97..26aca0d 100644
--- a/configs/ls2080ardb_defconfig
+++ b/configs/ls2080ardb_defconfig
@@ -38,3 +38,4 @@  CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index 139ff08..37f92a4 100644
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -44,3 +44,4 @@  CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2dab065..1b4c4b5 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -388,70 +388,67 @@  unsigned long get_board_sys_clk(void);
 	" 0x580e00000 \0"                       \
 	BOOTENV
 #else
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"scriptaddr=0x80800000\0"		\
-	"kernel_addr_r=0x81000000\0"		\
-	"pxefile_addr_r=0x81000000\0"		\
-	"fdt_addr_r=0x88000000\0"		\
-	"ramdisk_addr_r=0x89000000\0"		\
-	"loadaddr=0x80100000\0"			\
-	"kernel_addr=0x100000\0"		\
-	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xa0000000\0"			\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x21000000\0"		\
-	"mcmemsize=0x40000000\0"		\
-	"mcinitcmd=fsl_mc start mc 0x20a00000" \
-	" 0x20e00000 \0"                       \
-	BOOTENV
-#else
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"scriptaddr=0x80800000\0"		\
-	"kernel_addr_r=0x81000000\0"		\
-	"pxefile_addr_r=0x81000000\0"		\
-	"fdt_addr_r=0x88000000\0"		\
-	"ramdisk_addr_r=0x89000000\0"		\
-	"loadaddr=0x80100000\0"			\
-	"kernel_addr=0x100000\0"		\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581000000\0"		\
-	"kernel_load=0xa0000000\0"		\
+	"fdt_addr=0x64f00000\0"			\
+	"kernel_addr=0x65000000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"mcmemsize=0x40000000\0"		\
-	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580a00000" \
-	" 0x580e00000 \0"                       \
-	BOOTENV
-#endif
+	"console=ttyAMA0,38400n8\0"		\
+	BOOTENV					\
+	"boot_scripts=ls2088ardb_boot.scr\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"installer=load mmc 0:2 $load_addr "			\
+		"/flex_installer_arm64.itb; "			\
+		"bootm $load_addr#ls2088ardb\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..;"		\
+		"sf probe && sf read $load_addr "		\
+		"$kernel_addr $kernel_size &&"			\
+		" bootm $load_addr#$board\0"			\
+	"nor_bootcmd=echo Trying load from nor..;"		\
+		"cp.b $kernel_addr $load_addr "			\
+		"$kernel_size && bootm $load_addr#$board\0"
 #endif
 
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0600 " \
-				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
-				" hugepagesz=2m hugepages=256"
-
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_QSPI_BOOT
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
-			   " && bootm $kernel_start" \
-			   " || run distro_bootcmd"
+#define CONFIG_BOOTCOMMAND						\
+			"fsl_mc start mc 0x20a00000 0x20e00000 &&"	\
+			" fsl_mc lazyapply dpl 0x20d00000;"		\
+			"run distro_bootcmd;run qspi_bootcmd"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
-			   " && cp.b $kernel_start $kernel_load $kernel_size" \
-			   " && bootm $kernel_load" \
-			   " || run distro_bootcmd"
+#define CONFIG_BOOTCOMMAND						\
+			"fsl_mc start mc 0x580a00000 0x580e00000 &&"	\
+			" fsl_mc lazyapply dpl 0x580d00000;"		\
+			"run distro_bootcmd;run nor_bootcmd"
 #endif
 
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
+				"earlycon=uart8250,mmio,0x21c0600 " \
+				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
+				" hugepagesz=2m hugepages=256"
+
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_PHYLIB_10G