Go to journal home page - Materials Science and Engineering: A

Volume 748

Pages 1-462 (4 March 2019)

Actions for selected articles

/

Contents

Receive an update when the latest issues in this journal are published
Sign in to set up alerts
    1. Editorial Board

      Page IFC
      View PDF
  1. Research papers

    1. A comparison of microstructure and mechanical properties of laser cladding and laser-induction hybrid cladding coatings on full-scale rail

      Pages 1-15
    2. Accelerating nano-bainite transformation based on a new constructed microstructural predicting model

      Pages 16-20
    3. Development of a novel methodology to study fatigue properties using the small punch test

      Pages 21-29
      View PDF
    4. A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α + β phase region

      Pages 30-37
    5. Evaluation of the impact behaviour of AlSi10Mg alloy produced using laser additive manufacturing

      Pages 38-51
    6. Towards strength-ductility synergy with favorable strengthening effect through the formation of a quasi-continuous graphene nanosheets coated Ni structure in aluminum matrix composite

      Pages 52-58
    7. The effects of carbon on the phase stability and mechanical properties of heat-treated FeNiMnCrAl high entropy alloys

      Pages 59-73
    8. Structures and properties of Fe-(8-16)Mn-9Al-0.8C low density steel made by a centrifugal casting in near-rapid solidification

      Pages 74-84
    9. Effect of V addition on microstructures and mechanical properties of Cu-15Ni-8Sn alloy

      Pages 85-94
    10. Cold-working mediated converse age hardening responses in extruded Mg-14Gd-2Ag-0.5Zr alloy with different microstructure

      Pages 95-99
    11. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Mn alloy sheets processed by large-strain high-efficiency rolling

      Pages 100-107
    12. Multi-pass high-pressure sliding (MP-HPS) for grain refinement and superplasticity in metallic round rods

      Pages 108-118
    13. Direct laser deposition as repair technology for a low transformation temperature alloy: Microstructure, residual stress, and properties

      Pages 119-127
    14. Co-precipitation mechanism of nanoscale particles and mechanical properties in multicomponent ultra-high strength low carbon steel

      Pages 128-136
    15. Corrosion fatigue behavior of 304 stainless steel notched specimen in high-temperature pressurized water

      Pages 137-145
    16. Grain-wise simulation of stochastic damage and failure verified on a TiAl polycrystal

      Pages 146-160
    17. The effect of isothermal aging on microstructure and mechanical behavior of modified 2.5Al alumina-forming austenitic steel

      Pages 161-172
    18. Effect of local alloying on interfacial bonding in laminated copper matrix composites reinforced by carbon nanotubes

      Pages 173-179
    19. Mechanical properties and microstructural characterization of medium carbon non-quenched and tempered steel: Microalloying behavior

      Pages 180-188
    20. Mechanical properties and microstructural characterization of simulated heat-affected zones in 10 wt pct Ni steel

      Pages 189-204
    21. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting

      Pages 205-212
    22. A discussion of the effects of composition and heat treatment on the toughness of a medium carbon secondary hardening steel

      Pages 213-227
    23. Effect of second phase particles on mechanical properties and grain growth in a CoCrFeMnNi high entropy alloy

      Pages 228-235
    24. Effects of Y addition on microstructure and mechanical properties of Ti-25Zr alloys

      Pages 236-243
    25. The effect of boron content on the microstructure and mechanical properties of Fe50-XMn30Co10Cr10BX (x = 0, 0.3, 0.6 and 1.7 wt%) multi-component alloys prepared by arc-melting

      Pages 244-252
    26. The evolution of strain pattern induced by banded structure under uniaxial tension in low-carbon microalloyed steel

      Pages 253-261
    27. Plastic deformation behaviors and mechanical properties of advanced single crystalline CoNi-base superalloys

      Pages 267-274
    28. Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting

      Pages 275-285
    29. Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting

      Pages 286-293
    30. Influence of micro-alloying with Cd on growth pattern, mechanical properties and microstructure of as-cast Mg94Y2.5Zn2.5Mn1 alloy containing LPSO structure

      Pages 294-300
    31. On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys

      Pages 301-312
    32. Effect of temperature and loading sense on deformation-induced phase transformation in a high Sn content zirconium alloy

      Pages 313-326
    33. Effect of aging on the strength of corrosion-resistant incoloy alloys 945 and 945X: A microstructural perspective

      Pages 327-336
    34. On the role of hydrogen in stress corrosion cracking of magnesium and its alloys: Gas-analysis study

      Pages 337-346
    35. Microstructure and mechanical properties of direct laser metal deposited Haynes 282 superalloy

      Pages 347-356
    36. Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP

      Pages 357-366
    37. Superior fatigue life of Fe-15Mn-10Cr-8Ni-4Si seismic damping alloy under asymmetric cyclic loading with tensile mean strain

      Pages 371-378
    38. Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility

      Pages 379-385
      View PDF
    39. Effect of coiling conditions on the strengthening mechanisms of Nb microalloyed steels with high Ti addition levels

      Pages 386-395
    40. Applying a new push-to-pull micro-tensile testing technique to evaluate the mechanical properties of high dose Inconel X-750

      Pages 396-406
    41. Effects of additive manufacturing on the dynamic response of AlSi10Mg to laser shock loading

      Pages 407-417
    42. Texture evolution in Mg-8Sn-1Zn-1Al alloy during hot compression via competition between twinning and dynamic precipitation

      Pages 418-427
    43. Microstructure and room and high temperature mechanical properties of ultrafine structured Al-5 wt%Y2O3 and Al-5 wt%La2O3 nanocomposites fabricated by mechanical alloying and hot pressing

      Pages 428-433
    44. Microstructure and mechanical properties of PM Ti600 alloy after hot extrusion and subsequent annealing treatment

      Pages 434-440
    45. Formation and toughening of metastable phases in TiZrHfAlNb medium entropy alloys

      Pages 441-452
  2. Short communications

    1. Ultra-fine-grained Zn-0.5Mn alloy processed by multi-pass hot extrusion: Grain refinement mechanism and room-temperature superplasticity

      Pages 262-266
    2. Si phase modification on the elevated temperature mechanical properties of Al-Si hypereutectic alloys

      Pages 367-370
    1. Author Index

      Pages 453-455
      View PDF
    1. Subject Index

      Pages 456-462
      View PDF

ISSN: 0921-5093